fordfans.cz

pokud to dobre chapu tak nemas ani jeden klic ktery je naprogramovany do RJ, tak muzes vyzkouset tuhle metodu

for Ford keys
If you want to initiate a new master key....

1. Insert new key into ignition cylinder and turn it to the ON (RUN) position. The security light on the dash will flash for fifteen minutes.

2. When the security light stops flashing, you have FIVE minutes to start the next step. Turn the ignition cylinder OFF and then back to the ON (RUN) position. The security light on the dash will flash for fifteen more minutes.

3. When the security light stops flashing, you have FIVE minutes to start the next step. Turn the ignition cylinder to OFF and then back ON (RUN) position. The dash will flash for fifteen more minutes.

4. After the security light stops flashing the third time, the new key has been programmed into the vehicles computer and will operate the car. It has replaced ALL the previous electronic key codes and is the ONLY key programmed into the vehicles computer.

...postup co jsem uvedl v predchozim prispevku nemam odskousen, ale mel by byt pro toho kdo chce nakodovat novy master klic do imobiliseru